LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 2008 >> i-290 Standard >> Repair and Diagnosis >> Brakes >> Anti-Lock Brake System, Traction Control System & Stability Control System >> Repair Instructions >> Brake Pressure Modulator Valve Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of BPMV & Mounting Bracket
    GM1384684Courtesy of GENERAL MOTORS CORP.
  1. Install the BPMV to the mounting bracket.
    2. NOTE: Refer to Fastener Notice .
  2. Tighten the mounting nuts.

    Tighten:  Tighten the mounting nuts to 9 N.m (80 lb in).

  3. Install the EBCM assembly. Refer to Electronic Brake Control Module Replacement .
  4. Bleed the system. Refer to Hydraulic Brake System Bleeding (Manual) or Hydraulic Brake System Bleeding (Pressure) .
scientia non olet · About LEMON Manuals