Manifold Pressure Sensor (MPS)
- Disconnect battery. Pull connector from MPS. Using an ohmmeter connect test leads between the terminals. Compare resistance readings to specifications.
- If readings are not to specification, replace MPS. Reconnect MPS connector and battery.
MANIFOLD PRESSURE SENSOR RESISTANCE
| Terminals | Ohms |
|---|---|
| 7 & 15 | 85.5-94.5 |
| 8 & 10 | 346.5-353.5 |
| 7 or 15 & Ground | 0 |
| 8 or 10 & Ground | 0 |