LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jaguar >> 1995 >> XJ6 Base >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - 4.0L 6-CYL >> Fuel System >> Fuel System Pressure Release
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Fuel System Pressure Release

  1. Open trunk. Locate and disconnect fuel pump relay in right front corner of trunk. Relay is front-most relay (Black relay/Violet stripe with Green connector).
  2. On XJR, open hood. Remove heated second fuel pump relay from battery cover relay block. (Blue relay with Yellow connector).
  3. On all models, start engine and let idle until engine stalls. Turn ignition off. Install fuel pump relay(s).
scientia non olet · About LEMON Manuals