Automatic Transmission/Transaxle: Specifications
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Jaguar S-Type, 2007 Jaguar S-Type, 2006 Jaguar S-Type, 2005 Jaguar S-Type, and 2004 Jaguar S-Type. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Use only Shell M1375.4 Automatic transmission fluid. Use of any other fluids may result in a transmission malfunction or failure.
Fluid Maintenance
| Description | Intervals |
|---|---|
| Normal Maintenance | Not necessary. Filled for life. |
| Severe Duty Maintenance | Change the fluid at 48,000 km (30,000 miles) intervals. |
Lubricants, Fluids, Sealers and Adhesives
| Description | Specification |
|---|---|
| Transmission Fluid | Shell M1375.4 |
| Sealant | WSS-M4G323-A6 |
| Metal Surface Cleaner | WSW-M5B392-A |
| High Temperature Grease | Molecote FB180 |
General Specifications
| Vehicle | Engine | Approximate Liters | Refill Capacity Approximate dry capacity, includes cooler and tubes. Check the level at normal operating temperature. DO NOT OVERFILL. If it is necessary to add or change fluid, use only fluid which has been certified by the supplier as meeting the Jaguar Cars Ltd specification shown. U.S. Quarts |
|---|---|---|---|
| S-Type | 2.5L and 3.0L | 10.0 | 10.57 |
| S-Type | 4.2L | 10.0 | 10.57 |
| S-Type | 2.7L Diesel | 10.0 | 10.57 |
Torque Specifications
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Converter housing to engine retaining bolts | 48 | 35 | - |
| Transmission mount retaining bolts | 50 | 37 | - |
| Transmission fluid fill plug | A | A | A |
| Transmission control module (TCM) and Main control valve body retaining screws | 8 | - | 53 |
| Output shaft flange retaining nut | 60 | 44 | - |
| Torque converter retaining bolts | 55 | 41 | - |
| Transmission fluid cooler tube retaining bolt | 23 | 17 | - |
| Transmission fluid drain plug | 8 | - | 53 |
| Transmission fluid pan, gasket and filter retaining screws | 8 | - | 53 |
| A = refer to the procedure for correct torque sequence |
|||