Anti-Lock Control - Stability Assist: Specifications
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Jaguar S-Type, 2007 Jaguar S-Type, 2006 Jaguar S-Type, 2005 Jaguar S-Type, and 2004 Jaguar S-Type. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Do not use brake fluid ITT Super Dot 4 on 2006my vehicles onwards. Failure to follow this instruction may result in damage to the vehicle.
NOTE:
Brake fluid ITT Super Dot 4 has now been superseded by Shell ESL Super Dot 4 which is the Jaguar recommended brake fluid. Shell ESL Super Dot 4 can be used on all model years.
Lubricants, Fluids, Sealers and Adhesives
| Item | Specification |
|---|---|
| Brake fluid | ITT Super Dot 4 |
| Brake fluid | Shell ESL Super Dot 4 |
Torque Specifications
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Brake master cylinder primary pressure transducer | 30 | 22 | - |
| Brake tubes to hydraulic control unit (HCU) | 17 | 13 | - |
| Rear wheel speed sensor retaining bolt | 9 | - | 80 |
| Yaw rate sensor and accelerometer retaining nuts | 7 | - | 62 |
| Hydraulic control unit (HCU) retaining bolts | 9 | - | 80 |
| Steering wheel rotation sensor retaining screws | 4 | - | 35 |
| Steering column to lower shroud retaining screws | 3 | - | 27 |