Engine Control Module (ECM): Installation
WARNING: This page is about a different car, the 2002 Jaguar XKR and 2002 Jaguar XK8. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is a reversal of the removal procedure.
- Synchronize ECM, KTM and BPM using PDU.
- Complete engine set-up using JDS/PDU.
NOTE:
A replacement ECM may only be obtained from an authorized Jaguar dealer and MUST be ordered against the VIN.
NOTE:
Check condition of housing seals and replace as necessary.