Section 74 (Exhaust System): Specification
WARNING: This page is about a different car, the 2002 Jaguar XKR and 2002 Jaguar XK8. However, it is still accessible from the selected car via links, so may be relevant.
EXHAUST SYSTEM SETTINGS
| Description | mm |
|---|---|
| Intermediate muffler - Rear inside edge of muffler to rear suspension A-frame | 116 |
| Tailpipe to bumper aperture - Vertical | 25 - 35 |
| Tailpipe trim position - Vertical (permissible variation LH to RH) | 0 - 6 |
| Tailpipe trim position - Horizontal (permissible variation LH to RH) | 0 - 6 |
| Tailpipe trim surface to inside of bumper aperture | 35 - 45 |
TORQUES SPECIFICATIONS
| Component | Nm |
|---|---|
| Nut - Downpipe to exhaust manifold | 14 - 18 |
| Bolt - Downpipe to bracket | 39 - 51 |
| Torca clamp assembly | 60 - 80 |
| Tie strap fixings | 22 - 28 |
| Bolt - Grass shield fixings (Japanese market only) | 8,5 - 11,5 |
| Bolt - Over-axle mounting cradle to rear suspension A-frame | 22 - 28 |
| Bolt - Tailpipe mounting rubber upper support to body | 17 - 23 |
| Oxygen sensor to downpipe | 40 - 50 |