Section 2 (External Controls)
WARNING: This page is about a different variant/trim than selected.
- Specifications
- General Procedures
- Description & Operation
- Diagnosis & Testing
- Inspection & Verification
- Visual Inspection Chart
- Symptom Chart
- Diagnostic Trouble Code (DTC) Index
- Pinpoint Test
- Notes
- Pinpoint Test A: J-Gate System Circuit Checks
- Pinpoint Test B: DTC P1780 - D-4 Switch Malfunction (To VIN D15361)
- Pinpoint Test C: DTC P0915 - J-Gate Signal Inputs To The TCM (From VIN D15362)
- C1 - Check Transmission Range Sensor Continuity In D
- C2 - Check Transmission Range Sensor Drive Signal Wire For High Resistance
- C3 - Check Ignition Supply To The J-Gate
- C4 - Check Ground Supply To The J-Gate
- C5 - Check J-Gate Signal Input Wires For Continuity (4 Range)
- C6 - Check The J-Gate Signal Input Wires For Continuity (3 Range)
- C7 - Check The J-Gate Signal Input Wires For Continuity (2 Range)
- C8 - J-Gate Signals Functionality
- Removal & Installation
- Wiring Diagrams