LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jaguar >> 2003 >> XJ8 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (Automatic Transmission/Transaxle External Controls) >> Automatic Transmission/Transaxle External Controls >> Transmission Control Switch Adjustment - General Procedures
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transmission Control Switch Adjustment - General Procedures

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Jaguar XKR, 2006 Jaguar XK8, 2005 Jaguar XKR, 2005 Jaguar XK8, and 2004 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the floor console. Refer to Instrument Panel and Console article.
  2. Turn the ignition switch to the ON position
  3. Move the transmission selector lever to the "R" position.
    GJ0002471Courtesy of JAGUAR CARS, INC.
  4. Loosen the transmission control switch retaining screws.
    GJ0002472Courtesy of JAGUAR CARS, INC.
  5. Adjust the transmission control switch until the "R" position of the selector lever indicator is illuminated.
    GJ0002471Courtesy of JAGUAR CARS, INC.
  6. Tighten the transmission control switch retaining screws.
  7. Make sure all transmission selector lever positions illuminate the relevant transmission selector lever indicator positions.
  8. Make sure the engine starts when the transmission selector lever is in the "P" and "N" positions.
  9. Install the floor console. Refer to Instrument Panel and Console article.
scientia non olet · About LEMON Manuals