Transmission Control Module (TCM) and Main Control Valve Body - In-Vehicle Procedures: Removal

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Jaguar XKR, 2006 Jaguar XK8, 2005 Jaguar XKR, 2005 Jaguar XK8, and 2004 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.

Remove the fluid pan, gasket and filter. Refer to Fluid Pan, Gasket and Filter .

Courtesy of JAGUAR CARS, INC.

CAUTION: Make sure the transmission control module (TCM) and main control valve body are protected against electrostatic discharge. Failure to follow this instruction may result in component damage.

Reposition the locking device.

Courtesy of JAGUAR CARS, INC.
Disconnect the TCM and main control valve body electrical connector.
1. Reposition the electrical connector retaining ring.
2. Disconnect the electrical connector.
Courtesy of JAGUAR CARS, INC.

CAUTION: Make sure all suitable safety precautions are taken to protect the TCM and main control valve body electrical connector pins against electrostatic discharge.

Remove the sealing tube.

Courtesy of JAGUAR CARS, INC.
Remove and discard the seals.

Courtesy of JAGUAR CARS, INC.
Remove the TCM and main control valve body.
- Remove the retaining bolts.
Courtesy of JAGUAR CARS, INC.
Remove the TCM and main control valve body sealing block.

Courtesy of JAGUAR CARS, INC.
Remove and discard the seals.

Courtesy of JAGUAR CARS, INC.
Remove and discard the seals.