Accelerator Cable - Removal and Installation: Installation

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Jaguar XKR, 2006 Jaguar XK8, 2005 Jaguar XKR, 2005 Jaguar XK8, and 2004 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of JAGUAR CARS, INC.

CAUTION: Do not lubricate the accelerator cable. Failure to follow this instruction may result in incorrect cable adjustment.

NOTE: Install the accelerator cable to the position noted on removal.

Install the accelerator cable.

Courtesy of JAGUAR CARS, INC.
Attach the accelerator inner cable.

Courtesy of JAGUAR CARS, INC.
Attach the accelerator cable.

Courtesy of JAGUAR CARS, INC.
Attach the accelerator cable retaining sleeve.
1. Attach the accelerator cable.
2. Install the accelerator cable retaining sleeve.
Courtesy of JAGUAR CARS, INC.
Install a new accelerator cable retaining sleeve split pin.
Adjust the accelerator cable. Refer to Accelerator Cable Adjustment - General Procedures .