LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jaguar >> 2003 >> XJR >> Repair and Diagnosis >> External Pages >> Different car >> Section 139 (Control Components) >> Control Components >> Control Components - Description & Operation >> Automatic Operation >> Initial setting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Initial setting

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Jaguar XKR, 2006 Jaguar XK8, 2005 Jaguar XKR, 2005 Jaguar XK8, and 2004 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.

Should a new A/CCM be fitted, it will 'power-up' in the OFF mode; switching ON will result in the following settings:

Feature Status
Setting temperature 24°C or 75°F
LH and RH blower assembly recirculation / fresh flap Fresh mode
Control mode Automatic 'AUTO' displayed
Blower Auto
Compressor output A/C ON
Heated windshield and mirrors OFF
Water valve Auto temperature control

After initial start up the system operating conditions will be stored in the A/CCM to the conditions which prevailed prior to ignition OFF.