Module Configuration

There are two modes of configuration data. The first type requires configuration information so that the module can interact with the vehicle correctly. This information will be transferred to the new module using the Jaguar Approved Diagnostic System, so that it will contain the same settings as the old module.

Modules which require configuration when installing a replacement module are:

• Engine control module (ECM)
• Transmission control module (TCM)
• Audio unit
• Drivers door module (DDM)
• Rear electronic module (REM)
• Front electronic module (FEM)
• Amplifier
• Intrusion sensor module
• Multifunction voice activated control module
• Headlamp levelling module (ADHLS)
• Electronic park brake (EPB) module
• Instrument cluster and message centre
• Climate control module