Speed Control Module - Removal and Installation: Installation

Courtesy of JAGUAR CARS, INC.

1. Adjust the speed control module alignment bolt shoulder to mounting bracket clearance to 1.5mm.

   Courtesy of JAGUAR CARS, INC.

2. Install the speed control module.
   • Tighten to 5 Nm.

   Courtesy of JAGUAR CARS, INC.

3. Connect the speed control module electrical connector.
4. Check and adjust the speed control module alignment. Refer to Speed Control Module Alignment - General Procedures .
5. Install the hood. For additional information, Refer to Body Closures . .
6. Carry out the battery reconnection procedure. For additional information, Refer to Battery, Mounting and Cables . .
7. Initialize the system. For additional information, refer to the Jaguar approved diagnostic system.