Pedestrian Protection Accelerometer - Removal and Installation: Installation
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2009 Jaguar XKR, 2009 Jaguar XK8, 2008 Jaguar XKR, 2008 Jaguar XK8, and 2007 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
- Install the pedestrian protection accelerometer.
- Tighten the 6 bolts to 10 Nm (7 lb.ft).
- Connect the electrical connector.
- Install the front bumper air ducting.
- Secure with the clips.
- Install the radiator splash shield. Refer to Radiator Splash Shield article.