Navigation System Display Module - Removal and Installation: Installation
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2009 Jaguar XKR, 2009 Jaguar XK8, 2008 Jaguar XKR, 2008 Jaguar XK8, and 2007 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
- Install the navigation screen module.
- Tighten the Torx bolts to 6 Nm (4 lb.ft).
- Tighten the Torx screws.
- Install the clip.
- Install the navigation system module bracket.
- Connect the electrical connectors.
- Tighten the Torx screws.
- Install the instrument panel center reinforcement trim panel.
- Align the pegs and secure with the clips.
- Connect the battery ground cable. Refer to Specifications article.