Programmed Defrost
When the 'DEF' button is pressed, the automatic temperature control (ATC) module instigates the programmed defrost function. When selected, the automatic temperature control (ATC) module configures the system as follows:
- Automatic mode off
- Selected temperature unchanged
- Air inlet set to fresh air
- Air distribution set to windshield
- Blower speed set to level 6
- Windshield and rear screen heaters on.
The programmed defrost function can be cancelled by one of the following:
- Selecting any air distribution switch on the TSD
- Pressing the 'AUTO' switch below the TSD
- A second press of the 'DEF' button
- Switching the ignition OFF
NOTE:
The blower speed can be adjusted without terminating the programmed defrost function.