Pedestrian Protection Latch Actuator - Removal and Installation: Installation
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2009 Jaguar XKR, 2009 Jaguar XK8, 2008 Jaguar XKR, 2008 Jaguar XK8, and 2007 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
- Install the pedestrian protection latch actuator.
- Connect the electrical connector.
- Tighten the new Torx bolts to 9 Nm (7 lb.ft).
- Install the pedestrian protection hood actuator and bracket. See Pedestrian Protection Hood Actuator LH and Pedestrian Protection Hood Actuator RH .