Gen2.1 Front Control Display Interface Module Reconfiguration (SSM62197)
Publication date: 2013-01-23Reference number: SSM62197
GEN2.1 FRONT CONTROL DISPLAY INTERFACE MODULE RECONFIGURATION
TECHNICAL SERVICE BULLETIN
| JAGUAR: | XF/X250; XJ/X351 |
| CATEGORY: | Electrical |
ISSUE
Symptom 207000 Entertainment Systems
When updating the Front Control Display Interface Module (FCDIM) (also known as the Touch Screen Display or High Level Display Front) software for a vehicle in the VIN range shown below the Audio Front Control Module (AFCM) software should be updated first. Otherwise there is a possibility of the FCDIM update being unsuccessful.
CAUSE
A previous AFCM fix has caused an increase in the response time after the detection of a particular message. This then causes a software download fail in the FCDIM.
ACTION
Contents
If a customer reports a concern that results in a replacement or re-configuration of the FCDIM (that falls within the VIN range below) please check that the AFCM software is at the latest level (update if necessary) using DVD 132 P3 or later, before downloading the FCDIM software. If there is no update present please continue with the FCDIM software update.
VIN RANGE
XF
S20753-S50638 - Japan
S20753-S50780 - North America (JLNA)
S20753-S52792 - Europe
S20753-S53711 - EU L1 ACM (ACM without SAT NAV)
S20753-S53967 - ROW1
S20753-S55539 - ROW2
XJ
V00001-V37138 - North America (JLNA)
V00001-V38187 - Europe
V00001-V38238-Japan
V00001-V38456 - ROW1
V00001-V38975 - ROW2