Error Code 903 - 'Incorrect Service IDENTIFICATION' When Updating Vehicle Module Software Using SDD (SSM74542)
Publication date: 2019-09-06Reference number: SSM74542
ERROR CODE 903 - 'INCORRECT SERVICE IDENTIFICATION' WHEN UPDATING VEHICLE MODULE SOFTWARE USING SDD
TECHNICAL SERVICE BULLETIN
Reference Number(s): SSM74542, Date of Issue:
December 18, 2019
| JAGUAR: | E-PACE/X540; F-PACE/X761; F-TYPE/X152; S-TYPE/X200; X-TYPE/X400; XE/X760; XF/X250; XF/X260; XJ/X300; XJ/X350; XJ/X351; XJ V8/X308; XK/X100; XK/X150 |
| SERVICE CATEGORY: | Diagnostic Software Hardware |
ISSUE
When attempting to update the software on a module using JLR VCI, SDD shows the error message: "Error code 903 - Incorrect Service Identification"
CAUSE
We suspect that the latest update of the JLR-VCI is causing
missing diagnostic messages between the JLR VCI and the vehicles modules.
PERMANENT CORRECTIVE ACTION
This concern has been resolved with the release of SDD version 159.00. The manual patch will no longer be available to download and this SSM will be deleted in 7 days.