Navigation System Display Module: Installation
WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
- Install the navigation screen module.
- Tighten the Torx bolts to 6 Nm (4 lb.ft).
- Tighten the Torx screws.
- Install the clip.
- Install the navigation system module bracket.
- Connect the electrical connectors.
- Tighten the Torx screws.
- Install the instrument panel center reinforcement trim panel.
- Align the pegs and secure with the clips.
- Connect the battery ground cable. Refer to Specifications information.