April 5, 2026: LEMON Manuals is launched! Read the announcement.

Navigation System Display Module: Removal

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the battery ground cable. Refer to Specifications information.
Remove the instrument panel center reinforcement trim panel.
- Release from the 5 clips.

CAUTION: Protect the surrounding trim from damage when changing the component.

Release the navigation system module bracket.
- Remove the 4 Torx screws.
- Disconnect the 10 electrical connectors.
- Release the assembly.

NOTE: Do not disassemble further if the component is removed for access only.

Remove the navigation screen module.
- Remove the trim panel veneer upper retaining clip.
- Remove the 2 Torx screws.
- Remove the 4 Torx bolts.