LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jaguar >> 2014 >> XK Base, 2D Convertible >> Repair and Diagnosis >> Quick Lookups >> DTC Index >> Diagnostic Trouble Code Index DTC: Front Controls/Display Interface Module (FCDIM) -- XK/X150 >> Diagnostic Trouble Code Index DTC: Front Controls/Display Interface Module (FCDIM) >> Description And Operation >> Front Controls/Display Interface Module [FCDIM] >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Controls/Display Interface Module [FCDIM]: Notes

CAUTION: Diagnosis by substitution from a donor vehicle is NOT  acceptable. Substitution of control modules does not guarantee confirmation of a fault, and may also cause additional faults in the vehicle being tested and or the donor vehicle
NOTE:
  • If the control module or a component is suspect and the vehicle remains under manufacturer warranty, refer to the warranty policy and procedures manual, or determine if any prior approval program is in operation, prior to the installation of a new module component
  • Generic scan tools may not read the codes listed, or may read only 5-digit codes. Match the 5 digits from the scan tool to the first 5 digits of the 7-digit code listed to identify the fault (the last 2 digits give extra information read by the manufacturer-approved diagnostic system)
  • When performing voltage or resistance tests, always use a digital multimeter accurate to three decimal places and with a current calibration certificate. When testing resistance, always take the resistance of the digital multimeter leads into account
  • Check and rectify basic faults before beginning diagnostic routines involving pinpoint tests
  • Inspect connectors for signs of water ingress, and pins for damage and or corrosion
  • If diagnostic trouble codes are recorded and, after performing the pinpoint tests, a fault is not present, an intermittent concern may be the cause. Always check for loose connections and corroded terminals
  • Where an 'on demand self-test' is referred to, this can be accessed via the 'diagnostic trouble code monitor' tab on the manufacturers approved diagnostic system
  • Check DDW for open campaigns. Refer to the corresponding bulletins and SSMs which may be valid for the specific customer complaint and carry out the recommendations as needed

The service information below lists all diagnostic trouble codes (DTCs) that could be logged in the front controls display interface module. For additional information, refer to: Audio System (Information and Entertainment System - General Information, Diagnosis and Testing).