DTC C2007-13: Right Motor - Circuit open: Action
- Refer to the appropriate system wiring diagrams and check the electric park brake control module right actuator circuits for open circuit, high resistance. Repair circuit(s) as required. Clear DTC and retest
- Check for any electric park brake actuator-related DTCs and refer to the relevant DTC index
- Clear DTCs. Apply the park brake and retest
- If the fault persists, cycle ignition and clear DTCs. Temporarily connect the left-side actuator harness to the right actuator and vice versa, then apply and release the park brake. If DTC C2008-13 is set, replace the electric park brake right actuator. If DTC C2007-13 is set, check the electric park brake right actuator power circuit for short circuit faults and repair circuits as required. Reconnect actuator harnesses in original positions, clear DTCs and retest