LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1981 >> Cherokee S, 4.2L Eng VIN C, AWD >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Testing >> Switch Voltage Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Switch Voltage Test

  1. Connect one lead of a jumper wire to "RED" lead, and the other lead to "UP" terminal of switch. Connect one lead of a second jumper wire to ground terminal of switch and other lead to "DOWN": terminal. This will test "UP" operation of switch.
  2. If motor runs, voltage is present to motor. Connect switch to multiple connector and operate switch. If motor fails to run, replace switch. Test all switches in this manner.
  3. To test "DOWN" operation of switch, make connections as stated in step  1) except connect second lead of first jumper wire to "DOWN" terminal, and second lead of second jumper wire to "UP" terminal. Repeat tests on all switches. Results are the same as "UP" test.
scientia non olet · About LEMON Manuals