LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1990 >> Wrangler Base, 4.2 T, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Coolant Temperature Sensor (Cts) R & I >> Procedure >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Coolant Temperature Sensor (Cts) R & I: Procedure: Removal

  1. Drain the cooling system.
  2. Remove air cleaner assembly.
  3. Disconnect the CTS wire connector. See Fig 1 .
  4. Remove the CTS from the left side of the engine block.
Fig 1: Coolant Temperature Sensor (CTS) Connector
G50G04614Courtesy of CHRYSLER MOTORS.
scientia non olet · About LEMON Manuals