Vehicles Tested Mode

Mode is used to show what vehicles are covered by DRB-II cartridge. To access VEHICLES TESTED mode, turn ignition off. Attach DRB-II to engine diagnostic connector. Connector is located in engine compartment, near SBEC-II.

Turn ignition switch to RUN position. All DRB-II character positions will illuminate and copyright information will appear on screen for several seconds. After several seconds DRB-II menu will appear.

At DRB-II menu, press "1" (VEHICLES TESTED) key. Press ENTER key. DRB-II will display vehicles covered by cartridge. Screen will display for 5 seconds and return to DRB-II menu.