Bleeding Brake System: Notes

WARNING: This page is about a different car, the 1994 Eagle Vision, 1994 Dodge Intrepid, 1994 Chrysler New Yorker, 1994 Chrysler LHS, and 1994 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: During bleeding procedure, ensure fluid level remains close to full. Check fluid level periodically while bleeding system. Add DOT 3 brake fluid as required.

Teves-Mark IV ABS system must be bled as 2 independent braking systems. Always bleed base brake system using manual bleeding or pressure bleeding procedure before bleeding Hydraulic Control Unit (HCU). See MANUAL BLEEDING or PRESSURE BLEEDING. HCU must be bled separately. See BLEEDING HYDRAULIC CONTROL UNIT . Bleeding HCU requires Diagnostic Readout Box (DRB). Always repeat base system bleeding procedure after bleeding HCU.