LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1993 >> Grand Cherokee Base, 5.2 Y, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 102 (Engine Controls - Tests W/Codes - Body Control Computer) >> Verification Test >> Test VER-1 - Verification Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test VER-1 - Verification Procedure

WARNING: This page is about a different car, the 1994 Plymouth Voyager, 1994 Plymouth Grand Voyager, 1994 Dodge Grand Caravan, 1994 Dodge Caravan, and 1994 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure ignition is off and DRB is connected. Reconnect all previously disconnected components and connectors. Turn ignition on. If DRB screen is blank, go to TEST 2A. If DRB screen is not blank, go to next step.
  2. If there is a BUS failure message on DRB, go to TEST 1A. If there is no BUS failure message on DRB, select module in question. If DRB shows NO RESPONSE, go to TEST 1A.
  3. If DRB does not show NO RESPONSE, inspect vehicle for original complaint. If original complaint is present, go to TEST 1A. If original complaint is not present, repair is complete.