LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1993 >> Wrangler Base, 2.5 P >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Verification Test VER-1B >> BRAKELIGHT Switch Sensor Circuit
April 5, 2026: LEMON Manuals is launched! Read the announcement.

BRAKELIGHT Switch Sensor Circuit

  1. Check brakelight operation. If brakelights are not operating properly, repair as necessary. Perform VERIFICATION TEST VER-1A. If brakelights are operating properly, turn ignition off. Disconnect and inspect CAB 55-pin connector. Repair connector as necessary.
  2. Depress brake pedal. With DRB-II in voltmeter mode, probe terminal No. 32 (White/Tan wire) of CAB connector. If voltage is less than 9 volts, repair open White/Tan wire. Perform VERIFICATION TEST VER-1A. If voltage is more than 9 volts, replace CAB. Perform VERIFICATION TEST VER-1A.
scientia non olet · About LEMON Manuals