LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1994 >> Cherokee SE, 2D Utility, 2.5 P, RWD >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Controls - Basic Testing >> Fuel System >> Fuel Pressure >> Capacity (Volume) Test
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Capacity (Volume) Test

  1. Relieve fuel system pressure. See FUEL SYSTEM PRESSURE RELEASE. Disconnect fuel line on fuel rail. Place fuel line into a graduated container.
  2. Remove fuel pump relay (located in power distribution center). Using a jumper wire, connect terminals No. 30 and 87. See Figure . Volume of fuel should be one pint. (.47L) in 30 seconds. If fuel volume is not as specified, check for a plugged fuel filter or fuel pump inlet sock.
scientia non olet · About LEMON Manuals