Transmitter Programming
- Open driver's door of vehicle and leave open. Move manual door lock lever to LOCK position. Turn ignition switch ON.
- Within 20 seconds of turning ignition switch ON, aim transmitter at remote keyless entry module receiver dome and depress LOCK button for at least 5 seconds. Manual lock lever on door will unlock to confirm acceptance of programming.
- If additional transmitters are to be programmed, move manual lock lever to LOCK position and within 20 seconds of programming first transmitter repeat step 2) for each additional transmitter.NOTE: Up to four transmitters can be programmed.
- To lock programmed codes into module, turn ignition switch to OFF and back to ON within 20 seconds of programming last module.
NOTE:
Once step 4) is completed all previous transmitter codes are erased from keyless entry module memory.