Power Lock Switch Test

Remove switch from trim panel. See POWER LOCK SWITCH R & I  under REMOVAL & INSTALLATION. Perform continuity checks as specified in the POWER LOCK SWITCH CONTINUITY  . If switch fails any continuity checks, replace faulty switch. See Fig 1 , Fig 2 and Fig 3 .

Fig 1: Driver's Power Lock Switch Terminals (2 Door)

Courtesy of CHRYSLER CORP.

Fig 2: Driver's Power Lock Switch Terminals (4 Door)

Courtesy of CHRYSLER CORP.

Fig 3: Passenger Power Lock Switch Terminals

Courtesy of CHRYSLER CORP.