Preliminary Inspection
- Ensure shift cable and throttle cable are properly adjusted and no binding exists. If adjustment is required, see appropriate TRANSMISSION SERVICING - A/T article in TRANSMISSION SERVICING.
- Check engine throttle operation. Fully depress accelerator and ensure throttle plate fully opens. Adjust cable or linkage if throttle plate does not fully open.
- Ensure transmission fluid level is correct with transmission at normal operating temperature. If fluid is required, use Mopar Dexron-III/Mercon (4773590) ATF or equivalent.
- Ensure engine will start with shift lever in Park or Neutral only. If engine starts in gear, adjust neutral safety switch. See PARK/NEUTRAL POSITION SWITCH under REMOVAL & INSTALLATION.