Power Window Switch Test
Remove switch from door trim panel. See POWER WINDOW SWITCH under REMOVAL & INSTALLATION. Disconnect switch from chassis wiring. Check switch continuity as specified in appropriate POWER WINDOW SWITCH CONTINUITY table. If switch tests as specified, go to MOTOR TEST . If switch fails any continuity check, replace faulty switch. See Fig 1 .
REAR POWER WINDOW SWITCH
| Switch Position | Check Continuity Between Pins No. |
|---|---|
| All Positions | 3 & 6 |
| Off | 1 & 2; 4 & 5 |
| Forward | 1 & 2; 5 & 6 |
| Rearward | 2 & 6; 4 & 5 |