Power Mirror Switch
Power mirror switch is integral to Driver Door Module (DDM). Remove power mirror switch. See DRIVER DOOR MODULE under REMOVAL & INSTALLATION. Place mirror select switch in left or right mirror mode. Continuity should exist between specified terminals when each control button is depressed. See POWER MIRROR SWITCH CONTINUITY TEST . See Fig 1 . If continuity does not exist, replace DDM.
POWER MIRROR SWITCH CONTINUITY TEST
| Switch Position | Terminals No. | |
|---|---|---|
| Left Mirror | ||
| Up | 1 & 3; 2 & 5 | |
| Down | 2 & 3; 1 & 5 | |
| Right | 3 & 6; 2 & 5 | |
| Left | 2 & 3; 5 & 6 | |
| Right Mirror | ||
| Up | 3 & 7; 2 & 5 | |
| Down | 2 & 3; 5 & 7 | |
| Right | 3 & 4; 2 & 5 | |
| Left | 2 & 3; 4 & 5 | |