Power Window Switch
NOTE:
The following test is for rear door power window switches. Front door power window switches are integral to door modules. For front door power window switch testing, see DOOR MODULE
.
Disconnect negative battery cable. Remove rear power window switch from door trim panel. See POWER WINDOW SWITCH under REMOVAL & INSTALLATION. With switch in specified position, check switch continuity. See REAR POWER WINDOW SWITCH CONTINUITY . See Fig 1 . Replace switch as necessary. If switch is okay, go to POWER WINDOW MOTOR .
REAR POWER WINDOW SWITCH
| Switch Position | Check Continuity Between Terminals No. |
|---|---|
| All Positions | 3 & 6 |
| Off | 1 & 2; 4 & 5 |
| Up | 1 & 2; 5 & 6 |
| Down | 2 & 6; 4 & 5 |