Power Mirror Test 5B - Mirror Memory Inoperative
NOTE:
Perform POWER MIRROR TEST 5A
before proceeding. For connector terminal ID, see CONNECTOR IDENTIFICATION
and WIRING DIAGRAM and MIRRORS - POWER
article. Perform TEST VER-1A
after each repair.
CAUTION:
Always turn ignition switch to OFF position prior to disconnecting any module connector. Ensure all connectors are clean and tight.
Disconnect driver's or passenger's power mirror connector. If scan tool displays MIRROR HORIZ/VERT: OPEN, replace appropriate mirror. If scan tool displays MIRROR HORIZ/VERT: SHORT, replace appropriate door module.