LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1998 >> Wrangler SE, Automatic >> Repair and Diagnosis >> Electrical >> Charging Systems >> Generator >> Self-Diagnostic System >> Retrieving DTCS >> Using Scan Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using Scan Tool

  1. Ensure battery is fully charged. Connect scan tool to Data Link Connector (DLC). DLC is located below instrument panel, near steering column.
  2. Using scan tool manufacturer's instructions, retrieve and record DTCs displayed on scan tool and proceed to SELF-DIAGNOSTIC TESTS . Once repairs are made, clear DTCs from PCM memory. Refer to CLEARING DTCS .
scientia non olet · About LEMON Manuals