LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1998 >> Wrangler Sahara, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal, Overhaul & Installation - 4.0L >> Computerized Engine Controls >> Pcm Programming >> Procedure For Programming PCM & Clearing DTCs From ABS & SRS Modules
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Procedure For Programming PCM & Clearing DTCs From ABS & SRS Modules

  1. Connect scan tool to Data Link Connector (DLC). DLC is located below instrument panel near steering column. See Figure .
  2. Using scan tool, enter correct VIN and mileage into PCM. Using scan tool manufacturer's instructions, clear DTCs from ABS and SRS modules.
scientia non olet · About LEMON Manuals