Turn Signal Switch

Tighten the one screw located below the multi-function switch control stalk that secures the multi-function switch water shield and bracket to the steering column to 1.1 Nm (10 in. lbs.).

Tighten the two screws that secure the multi-function switch water shield and bracket to the top of the steering column to 2.2 Nm (20 in. lbs.).

Tighten the three screws that secure the lower steering column shroud to the upper shroud to 2 Nm (18 in. lbs.).

Tighten the two nuts that secure the non-tilt steering column upper mounting bracket to the dash panel steering column support bracket studs to 22 Nm (200 in. lbs.).