LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1999 >> Cherokee Limited, 2.5 P >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes >> Verification Tests >> Test VER-3A >> Final Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Final Procedure

  1. Inspect vehicle to ensure all engine components are connected. Reassemble and reconnect components as necessary. If Powertrain Control Module (PCM) has not been replaced, use scan tool to erase DTCs. To ensure no charging system problem exists, start engine. Increase engine speed to 2000 RPM for at least 30 seconds. Allow engine to idle. Turn engine off. Turn ignition on, with engine off and go to next step.
  2. Using scan tool, read DTCs. If any DTC returns, perform appropriate test(s) listed under SELF-DIAGNOSTIC TESTS. See DTC MESSAGES & CODES table. If no DTCs return, test is complete. Go to next step.
  3. Turn ignition on, with engine off. Using scan tool, erase DTCs. Turn ignition off. Disconnect scan tool. Test is complete.
scientia non olet · About LEMON Manuals