LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1999 >> Cherokee Limited, 2.5 P >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes >> Verification Tests >> Test VER-5A2
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test VER-5A2

  1. Connect scan tool to Data Link Connector (DLC). Using scan tool, monitor SIMILAR CONDITIONS to attempt to duplicate conditions that vehicle was operating at when DTC was set. If conditions can be duplicated, GOOD TRIP COUNTER will change to one or more. If conditions cannot be duplicated, use scan tool to erase DTCs. Disconnect scan tool from DLC. Go to next step.
  2. If the repaired OBD-II DTC was reset, or OBD-II monitor failed after running, the repair is not complete. Check for related Technical Service Bulletins (TSBs) or flash updates. If repaired DTC or another DTC exists, perform appropriate test(s) listed under SELF-DIAGNOSTIC TESTS. See DTC MESSAGES & CODES table. If no DTCs return, test is complete.