Wiper System

Wiper system controls are located on right multifunction switch. Wiper system provides driver's with normal wipe (low and high speeds), intermittent wipe, wipe after wash and pulse wipe functions. Low and high speeds are directly controlled by multifunction switch. Intermittent wiper function is controlled through intermittent wiper relay and Body Control Module (BCM). Wipe after wash function is controlled by BCM. After washer motor is activated, BCM will command wipers to operate 3 times. BCM uses vehicle speed input to double normal delay times when vehicle speed is less than 10 MPH.

Rear wiper system controls are located on right multifunction switch. A rotary knob controls rear wiper speed. Rear wiper system functions are not controlled by BCM.