Control Circuit Testing

The starter control circuit components should be tested in the order in which they are listed, as follows:

- Starter Relay - Refer to Starter Relay for the location of the proper starter relay diagnosis and testing procedures.

- Starter Solenoid - Refer to Starter Motor for the location of the proper starter solenoid diagnosis and testing procedures.

- Ignition Switch - Refer to Ignition Switch and Key Lock Cylinder for the location of the proper ignition switch diagnosis and testing procedures.

- Clutch Pedal Position Switch - If the vehicle is equipped with a manual transmission, refer to Clutch Pedal Position Switch for the location of the proper clutch pedal position switch diagnosis and testing procedures.

- Park/Neutral Position Switch - If the vehicle is equipped with an automatic transmission, refer to Park/Neutral Position Switch for the location of the proper parking neutral position switch diagnosis and testing procedures.