LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2000 >> Wrangler SE, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal, Overhaul & Installation >> Computerized Engine Controls >> Powertrain Control Module (Pcm) >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

  1. PCM is located in engine compartment. For PCM location, see PCM LOCATION  table. Disconnect negative battery cable. Remove cover for access to electrical connectors at PCM. Disconnect electrical connectors from PCM. Remove PCM retaining bolts and PCM.
  2. To install, reverse removal procedure. Tighten PCM retaining bolts to specification. See TORQUE SPECIFICATIONS .
PCM LOCATION

Application Location
Cherokee Left Front Corner Of Engine Compartment
Grand Cherokee Right Rear Corner Of Engine Compartment, Behind Coolant Tank
Wrangler Right Rear Corner Of Engine Compartment, Near Battery
scientia non olet · About LEMON Manuals