LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2001 >> Cherokee Limited, 4WD >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> On-Vehicle Testing >> Park/Neutral Position Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Park/Neutral Position Switch

  1. Place gear selector lever in Park. Disconnect negative battery cable. Raise and support vehicle. Disconnect Park/Neutral Position (PNP) switch 3-pin connector. Using DVOM, check for continuity between switch center terminal and good ground. If continuity exists, go to next step. If continuity does not exist, replace faulty PNP switch.
  2. Place gear selector lever in Reverse. Check for continuity between switch center terminal and good ground. If continuity does not exist, switch is okay. If continuity exists, replace faulty (PNP) switch.