LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2002 >> Grand Cherokee Overland >> Repair and Diagnosis >> Quick Lookups >> Common Specs & Procedures >> Specifications Index
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Specifications Index

GRAND CHEROKEE SPECIFICATIONS INDEX

System Specification/Procedure
Air Conditioning
Service
Automatic SPECIFICATIONS
Manual SPECIFICATIONS
Torque
Automatic TORQUE SPECIFICATIONS
Manual TORQUE SPECIFICATIONS
Axle Nut/Hub Nut 175 Ft. Lbs. (237 N.m)
Battery SPECIFICATIONS
Brakes
Bleeding Sequence
With ABS STANDARD PROCEDURE - BLEEDING ABS BRAKE SYSTEM
Without ABS BLEEDING SEQUENCE
Disc Brakes DISC BRAKE SPECIFICATIONS
Torque GRAND CHEROKEE
Charging
Generator GENERATOR APPLICATION
Torque TORQUE SPECIFICATIONS
Drive Belts
Adjustment ACCESSORY DRIVE
Belt Routing
4.0L See Figure located under REMOVAL - 4.0L ENGINE .
4.7L See Figure located under REMOVAL - 4.7L ENGINE .
Engine Cooling
General Service Specifications
4.0L Capacity - 15.0 Qts. (14.2L). For additional information, see COOLING SYSTEM .
4.7L Capacity - 14.5 Qts. (13.7L). For additional information, see COOLING SYSTEM .
Radiator Cap Pressure 18-21 psi
Water Pump R & I
4.0L WATER PUMP
4.7L WATER PUMP
Engine Mechanical
Compression ENGINE COMPRESSION
Oil Pressure
4.0L Minimum oil pressure should be 13 psi (.9 kg/cm2 ) at 600 RPM. Normal oil pressure should be 37-75 psi (3-5 kg/cm2 ) at greater than 1600 RPM. Oil pressure relief is 75 psi (5 kg/cm2 ).
4.7L Oil pressure is 4 psi (.3 kg/cm2 ) at idle, and 25-80 psi (1.7-5.6 kg/cm2 ) at 3000 RPM with engine at normal operating temperature.
Overhaul
4.0L ENGINE SPECIFICATIONS
4.7L ENGINE SPECIFICATIONS
Torque
4.0L TORQUE SPECIFICATIONS
4.7L TORQUE SPECIFICATIONS
Fluid Specifications See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button.
Flywheel/Drive Plate/Flex Plate Torque
4.0L 28 Ft. Lbs. (38 N.m)
4.7L 45 Ft. Lbs. (60 N.m)
Fuel System
Fuel Filter Location FUEL FILTER
Pressure Specifications FUEL PUMP
Fuel Pressure Test Procedure FUEL PRESSURE TEST
Fuel Pressure Release FUEL SYSTEM PRESSURE RELEASE
Ignition
Firing Order & Cylinder Identification
4.0L & 4.7L FIRING ORDER & CYLINDER IDENTIFICATION
Ignition Wires (Resistance) HIGH TENSION WIRE RESISTANCE
Ignition Wires (Routing) FIRING ORDER Wire routing is located in Figures
Spark Plugs SPARK PLUGS
Starting
Starter STARTER MOTOR SPECIFICATIONS - GAS POWERED
Torque TORQUE SPECIFICATIONS - STARTER
Wheel Alignment
Alignment Specifications ALIGNMENT SPECIFICATIONS
Torque TORQUE SPECIFICATIONS
Wheel & Tire
Lug Nut Torque 85-115 Ft. Lbs. (115-156 N.m)