Hardwired Indicators

HARDWIRED INDICATORS
The following indicators are hardwired to the Instrument Cluster and will only operate with the ignition in the Run/Start position.

Seat Belt
* Illuminates during bulb check for 6 (six) seconds unless the seat belt is buckled (seat belt switch closed).
* Illuminates when a ground input is provided to the cluster.
* Non-replaceable LED.

Part Time
* Does not illuminate during bulb check.
* Indicates which mode the transfer case is in.
* Non-replaceable LED.

Brake/Park Brake
* Illuminates during bulb check for 4 (four) seconds.
* Illuminates when a ground input is provided to the cluster from the Park Brake Switch or when the Brake Warning Indicator Switch is grounded.
* If the Park Brake input is grounded and vehicle speed is present, the cluster will flash the indicator.
* Non-replaceable LED.

High Beam
* Does not illuminate during bulb check.
* Illuminates when a battery input is provided to the cluster.
* If the Park or Headlamps inputs are switched to battery with the driver door open and the ignition off; the cluster will flash the indicator.
* Replaceable bulb.

Turn Signal - Left
* Does not illuminate during bulb check.
* Illuminates when a battery input is provided to the cluster.
* Replaceable bulb.

Turn Signal - Right
* Does not illuminate during bulb check.
* Illuminates when a battery input is provided to the cluster.
* Replaceable bulb.

Front/Rear Fog
* Does not illuminate during bulb check.
* Illuminates when a battery input is provided to the cluster.
* Non-replaceable LED.

ABS
* Does not illuminate during bulb check.
* Illuminates when a ground input is provided to the cluster.
* Non-replaceable LED.