Hard Wired Inputs
WARNING: This page is about a different car, the 2002 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
The hard-wired inputs to the BCM include the following:
- A/C switch signal
- Ambient temperature sensor signal
- Body control module flash enable
- Coolant level switch sense
- Door ajar switch sense (two circuits, one left rear and one right rear)
- Driver seat heater switch MUX
- Fog lamp switch sense
- Fused B (+)
- Fused ignition switch output (run-acc)
- Fused ignition switch output (st-run)
- Ground (five circuits, two Z1 and three Z2)
- Hazard switch sense
- Headlamp switch MUX
- High beam switch sense
- Hood ajar switch sense (export only)
- Key-in ignition switch sense
- Liftgate ajar switch sense
- Liftgate courtesy disable
- Liftgate flip-up ajar switch sense
- Panel lamps dimmer signal
- Park lamp relay output
- Passenger seat heater switch MUX
- PCI bus
- Radio control MUX
- Rear window defogger switch sense
- Seat belt switch sense
- Ultralight sensor signal
- Washer fluid switch sense
- Washer pump switch sense
- Windshield wiper switch MUX
- Wiper park switch sense